Stencil Pattern for Swarovski Hotfix and Non Hotfix Rhinestones.

These top quality stencils can be use with hotfix and non hotfix rhinestones (Crystals and Pearls) and they are reusable, they made from a heat resistant material so they will not melt or burn when used with a hot fix tool. Just use the hot fix tool pick up the rhinestones and fill in the holes on the stencil, once you have filled in all the holes then your design is complete…SIMPLE as THAT. Follow The Instructions below.


Eagle Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Alphabet Hotfix Stencil Pattern

Size approx :

9 x 29 cm

Instructions :

You will need Swarovski flatback SS10 size 2.8 - 3 mm.
Price/each
Kitten Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Kitten Hotfix Stencil Pattern

Size approx :

18x23 cm

Instructions :

You will need 36 pcs of Swarovski flatback SS16 size 4mm and 125 pcs of SS20 size 5mm.
Price/each
Ribbon Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Ribbon Hotfix Stencil Pattern

Size approx :

10 x 22.5 cm

Instructions :

You will need 111 pcs of Swarovski flatback SS20 size 5mm.
Price/each
Hibiscus Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Hibiscus Hotfix Stencil Pattern

Size approx :

13 x 18 cm

Instructions :

You will need 38 pcs Swarovski flatback SS16 size 4 mm and 78 pcs SS20 size 5mm. When
Price/each
Fleur De Lis Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Fleur De Lis Hotfix Stencil Pattern

Size approx :

12 x 22.5 cm

Instructions :

You will need 131 pcs of Swarovski flatback SS20 size 5mm.
Price/each
Small Butterfly Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Small Butterfly Hotfix Stencil Pattern

Size approx :

10 x 15 cm

Instructions :

You will need 70 pcs of Swarovski flatback SS20 size 5mm.
Price/each
Summer Beach Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Summer Beach Hotfix Stencil Pattern

Size approx :

18x23 cm

Instructions :

You will need 178 pcs of Swarovski flatback SS20 size 5mm.
Price/each
Eagle Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Eagle Hotfix Stencil Pattern

Size approx :

18 x 19 cm

Instructions :

You will need 255 pcs of Swarovski flatback SS16 size 4mm and 166 pcs SS20 size 5mm.
Price/each
Heart Neckline Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Heart Neckline Hotfix Stencil Pattern

Size approx :

25.5 x 20 cm

Instructions :

You will need 156 pcs of Swarovski flatback SS16 size 4mm and 44 pcs SS20 size 5mm.
Price/each
Swirls Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Swirls Hotfix Stencil Pattern

Size approx :

9 x 29 cm

Instructions :

You will need 148 pcs of Swarovski flatback SS20 size 5mm.
Price/each
Cross Stencil Pattern for Hotfix rhinestones.

Stencil Design :

Cross Hotfix Stencil Pattern

Size approx :

10 x 14.5 cm

Instructions :

You will need 54 pcs of Swarovski flatback SS20 size 5mm.
Price/each


Hotfix Rhinestones Application Instructions:

1. Place stencil on garment and use sticky tape to avoid stencil from moving.
2. Pick up Hotfix crystals with applicator.
3. Wait 5 - 7 seconds until the glue on the back side is heated.
4. Place crystal on the stencil hole and press lightly to release.  Do not hold in place.
5. Repeat step 2 through to 4 until stencil is completely filled.
6. Remove Stencil.

*After applied please leave for 24 hours before wash, during this period, handle the fabric with care.*

Please note : When buying Swarovski Flatback, please look mainly on SS size as all crystal sizes are + - 0.1 or 0.2 mm

Non Hotfix Rhinestones Application Instructions:

1. Place stencil on garment and use sticky tape to avoid stencil from moving.

2. Place glue spots onto the fabric in whatever patterns you want about 10 - 20 at a time and apply more spots later so the glue will not dry out before you apply all the rhinestones. The glue spots must be smaller than the rhinestones you are using, the glue should just come around the rhinestone edge. You want to glue the rhinestone glass edge to the fabric, not just the back of the rhinestone but if the glue slightly come out of the edge its ok as Gem Tac dries clear.

3. Before you place rhinestones on the glue spots leave about 20 seconds for the glue to settle on the surface, then it will be easier to place rhinestones on.

4. Leave for 3 hours before removing stencil.

*After applied please leave for 24 hours before wash, during this period, handle the fabric with care.*

To launder please read Instructions Click Here




Beads Designs and Web Pages Copyright © 2003 - 2010 Crystal-Beads.co.uk, All rights reserved
Web design by : Rangsiya, Last modified : 17 September 2010